Tyler Padgitt
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 0
Hey guys I just got a Marlo water softener. I have no floor drain for it and send the discharge overhead. What should I do for the brine tank overflow line? Stick it in a 5 gallon bucket?
No floor drain for softener
- Thread starter Tyler Padgitt
- Start date
Gary Slusser
That's all folks!
- Messages
- 6,921
- Reaction score
- 22
- Points
- 38
- Location
- Wherever I park the motorhome.
- Website
- www.qualitywaterassociates.com
Most people don't do anything with it. Wise people check the salt (and water) level like weekly to catch a problem before they have salt water on the floor.
A 5 gallon bucket may over flow also. It depends on how long water flows into it.
A 5 gallon bucket may over flow also. It depends on how long water flows into it.
Sponsor
Paid Advertisement
ditttohead
Water systems designer, R&D
Most systems use a timed refill and include a safety float in the brine tank for proper redundancy to prevent water from overfilling the brine tank due to a power failure during refill, or a leaking and worn brine valve.
The gravity overflow is rarely connected unless the system is installed in a highly water sensitive area.
Softeners should not typically be installed in highly water sensitive areas without proper floor drainage in case of a leak.
The gravity overflow is rarely connected unless the system is installed in a highly water sensitive area.
Softeners should not typically be installed in highly water sensitive areas without proper floor drainage in case of a leak.
Mikey
Aspiring Old Fart, EE, computer & networking geek
Another leak a 5-gallon bucket or a safety float won't address:
https://terrylove.com/forums/showth...016351-leaking&p=355737&viewfull=1#pos***5737
If this were in a super-critical area, I'd probably put the brine tank inside a cut-off 55-gallon drum, with a water sensor in it tied to the home security system.
https://terrylove.com/forums/showth...016351-leaking&p=355737&viewfull=1#pos***5737
If this were in a super-critical area, I'd probably put the brine tank inside a cut-off 55-gallon drum, with a water sensor in it tied to the home security system.
Last edited:
Tyler Padgitt
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 0
Can anyone confirm that a Marlo Water Softener has a Fleck head? I was told it does.. Or at least that Fleck makes the heads they use?
Tyler Padgitt
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 0
Bumping this to find out if Marlo heads are made by fleck...
Gary Slusser
That's all folks!
- Messages
- 6,921
- Reaction score
- 22
- Points
- 38
- Location
- Wherever I park the motorhome.
- Website
- www.qualitywaterassociates.com
You can go to www.fleckcontrols.com and look at some pictures and see if yours matches any of their valves.
But if you find one, it may look like as if you have a Fleck whatever but... yours may have a part or two that is proprietary to only Marlo.
But if you find one, it may look like as if you have a Fleck whatever but... yours may have a part or two that is proprietary to only Marlo.
Similar threads
