Water pump

Randy54 · Mar 25, 2013

My pump comes on a lot with no water running. There are no leaks in the house. I'm told the most common problem is that the bladder loses air. I have a Gould model V60 . How can I find out the proper amount of air to put in. Thanks

LLigetfa · Mar 25, 2013

There is a sticky that explains it in detail.

https://terrylove.com/forums/showthread.php?20849-Pressure-Tank-Maintenance

That said, you must still be losing some water somewhere for the pump to come on.

Sponsor · 2022-01-29T12:20:58-0800

Cacher_Chick · Mar 25, 2013

If the pump cycles when no water is being run, it is a sure sign of a leak. The leak can be anywhere between the pump and the fixtures in the house.

Valveman · Mar 25, 2013

If you are sure no water is running then it is probably the check valve leaking back.

Randy54 · Mar 25, 2013

Thanks for the replies. Is the check valve on the line. Or on the pump itself?

Valveman · Mar 25, 2013

Could be either or both. What kind of pump do you have, above ground jet pump or submersible?

Randy54 · Mar 26, 2013

Not sure of the make. Although I think it's a golds. It's sub

Cacher_Chick · Mar 26, 2013

The pump has a check valve, and it is pretty common for he installer to place another in the drop pipe.
It is also very possible that the drop pipe or lateral line is leaking, particularly if it is galvanized pipe.

Randy54 · Mar 29, 2013

It looks like the pitless adaptor is bad. Thanks for all the help. This site is very informative!

Water pump

Randy54

New Member

LLigetfa

DIYer, not in the trades

Sponsor

Paid Advertisement

Cacher_Chick

Test, Don't Guess!

Valveman

Cary Austin

Randy54

New Member

Valveman

Cary Austin

Randy54

New Member

Cacher_Chick

Test, Don't Guess!

Randy54

New Member

Similar threads