whose online? am stumped, but i know one look at these pics and u can help.
- Thread starter CanOfWorms
- Start date
CanOfWorms
Member
They were all fine I just needed ro flush Line and now flow is ggood
Sponsor
Paid Advertisement
Asktom
Member
Valley springs have those plastic sleeves. Are you sure you don't have Valley? With Delta the spring would push the rubber seats against a ball, If Valley they push against a flat surface. You need to get the right one.
Jimbo
Plumber
That is a Valley faucet, not Delta. Valley uses slightly different rubber and spring, with the white plastic insert.
CanOfWorms
Member
it could very well be a Valley. I took the white plastic inserts out and put it back together without them. Its not leaking and the flow is very good since I flushed the lines.
What's the risk of not having the sleeves?
What's the risk of not having the sleeves?
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
quote; What's the risk of not having the sleeves?
Premature failure and leaking. They did NOT put the sleeves in there because they had them left over from something else and wanted to get rid of them.
Premature failure and leaking. They did NOT put the sleeves in there because they had them left over from something else and wanted to get rid of them.
Similar threads
