Jadnashua
Retired Defense Industry Engineer xxx
Don't use a topical waterproofer with a vapor barrier behind the sheet goods...one or the other, not both.
Green/Cement Board Overlapping Tub Flange vs Leaving Gap Between Board and Flange
- Thread starter DavidSeon
- Start date
JohnfrWhipple
BATHROOM DESIGN & BUILD
Tough design call.
Grout breathes.
Your install is no different than a tub install.
Grout breathes.
Your install is no different than a tub install.
Last edited by a moderator:
Sponsor
Paid Advertisement
JohnfrWhipple
BATHROOM DESIGN & BUILD
Green EBoard Shower Update
A couple years back we got a bad batch of GreenEBoard.
Was not very happy with what I found.
I later stumbled upon WonderBoard Lite - it is now my goto backer board.
A couple years back we got a bad batch of GreenEBoard.
Was not very happy with what I found.
I later stumbled upon WonderBoard Lite - it is now my goto backer board.
Last edited by a moderator:
keepitsimplestupid
New Member
Help. My tub is existing and not centered, I would like the hardee board to go over the tub flange but I would have to shim it out about 1/2 inch on one side on each end for it to be level, should I use wood or plastic shims, or does it matter?
Similar threads
