removing goulds impeller

poormansdvd · Jan 31, 2013

how do i hold the shaft to remove impeller

heard that it was on this site but i cannt find it

Valveman · Jan 31, 2013

The impeller is already off. All that is left is the mechanical seal.

Sponsor · 2022-01-29T12:20:58-0800

poormansdvd · Feb 1, 2013

i need to know to to remove my mine that is just a picture of a pump like mine?

Valveman · Feb 1, 2013

If you can't get a wrench on the shaft between the pump and motor, then you can remove the end of the motor, and there should be some flats on that end of the shaft to get a cresent on.

LLigetfa · Feb 1, 2013

Goulds has a service manual on their site. On page 68, it says:

9. A.O. Smith Motors – Remove motor end
cover. Insert 7⁄16" open end wrench under
switch mechanism or behind overload
protector onto flats on motor shaft.
While holding the shaft against rotating,
turn the impeller counterclockwise. The
impeller should turn completely off the
shaft in this manner.

poormansdvd · Feb 1, 2013

THANKS LLigetfa YOU THE BOMB

removing goulds impeller

poormansdvd

New Member

Valveman

Cary Austin

Sponsor

Paid Advertisement

poormansdvd

New Member

Valveman

Cary Austin

LLigetfa

DIYer, not in the trades

poormansdvd

New Member

Similar threads