Time for a new water softener system.

double post

silversaver said:

thanks lifespeed. I'll order 1-1/4" MNPT with optional brass sweat to connect to my home 1-1/4" copper pipes.

I'll have the installer cut the exiting 3/4" pipes and use 1-1/4" through out the system.

Click to expand...

Don't forget the optional 32mm distributor tube for the Fleck 7000. I'm sure you'll appreciate the results during those occasional heavy water use events. Let us know how it turns out.

This is what I'm ordering:

Tank Color Option:Almond
Insulating Jacket:NO Insulating Jacket
Brine Tank Size:18x33 Round Brine Tank 0
Res-Care Feeder:NO Res-Care Feeder
Resin Media Option:Hi-Capacity Resin - 8% Crosslink
Distributor Tube:With 32MM HI-FLOW Distributor
Turbulator Option:NO Turbulator 12x52 Tank
Plumbing Connection:BYPASS, Noryl 1-1/4" Male NPT
Drain Tubing:WITH Drain Tubing - 10 Ft.

maybe I'll get the brass sweat connection for my copper pipes. I believe I need the Connector Assembly, 1-1/4" x 1-1/2" Brass Sweat w/O-Ring (2-Pack) - 41243-01