Big2bird
IBEW Electrician
I have read here the disposal should be opposite the P-trap on a dual bowl kitchen sink set up. I am curious as to why that isrecommended.
Last edited by a moderator:
Curious about garbage disposal installation
- Thread starter Big2bird
- Start date
Then you can use an end outlet disposer kit with a baffle tee pointing down.
Sponsor
Paid Advertisement
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
The piping can get "complicated" if you have to try to fit the disposer and the trap in the same area. A minor point, but the only time you install a "Disposal" is if you are using a GE or Hotpoint unit. ALL the rest or "disposers", and GE gets upset when people call them Disposals.
An install with a disposer kit. The tee has a baffle that points the chips from the disposer down towards the p-trap.
Dj2
In the Trades
Why do all the plumbing in a very tight space if you could spread it out?
Similar threads
- Suggestion
