Suction line for 2" deep jet well
- Thread starter Jerred18
- Start date
LLigetfa
DIYer, not in the trades
I would use whatever size the pump and packer adapter is designed to use, probably 1-1/4".
Sponsor
Paid Advertisement
Texas Wellman
In the Trades
If you use 1.25" pipe you have to make sure your collars are "turned". Std. collars won't fit in a 2" well. If you use 1" then you have to adapt back to the 1.25" threads because the jets and well head is 1.25".
Are we talking galv. or PVC for the jet line?
Are we talking galv. or PVC for the jet line?
Masterpumpman
In the Trades
Texas Wellman said it best! Personally I like 1" PVC with a 1-1/4" to 1" special PVC adapter.
Unless you use turned 1-1/4" pipe couplings the couplings won't fit inside the 2' pipe of if they do they won't allow enough water passed the couplings to work well.
Unless you use turned 1-1/4" pipe couplings the couplings won't fit inside the 2' pipe of if they do they won't allow enough water passed the couplings to work well.
Similar threads
