Kohler shower caukless adaptor tricks?

T_Hartigan · Mar 10, 2012

Spent about 2 hrs trying to install a kohler shower drain. I cannot get the caulkless adaptor piece all the way down. I've soaped everything and just cannot get it installed.

Any tricks?

Thanks.

Tim

Hackney plumbing · Mar 10, 2012

Is the pipe coming up through the drain vertical or is the pipe off to one side not allowing the gasket to slide down? What kinda pipe is it?

Sponsor · 2022-01-29T12:20:58-0800

Terry · Mar 10, 2012

I sometimes split off some wood to the correct size and use it as a blunt chisel to push the rubber seal down. Make sure it's flat on the end so it doesn't split or tear the rubber seal. You can tap the wood tool you made with a hammer.

T_Hartigan · Mar 13, 2012

Thanks. The PVC pipe was centered, but not perfectly square to the drain. I did use a mallet to get it down. I hope it doesn't leak as I dont want to do that again, ever.

Tim

Curlysir · Apr 4, 2012

I used a carpenter pencil and a plastic headed hammer to install the seal on my drain I installed recently. The pencil was the only thing I had close at hand and it worked. These seals are a real pain in the rear to install. I hope they are good.

Hackney plumbing · Apr 4, 2012

I have a trick to install those on PVC pipe........But it is classified info. Top secret. I MIGHT would share it with Terry since it is his forum.

Kohler shower caukless adaptor tricks?

T_Hartigan

New Member

Hackney plumbing

Homeowner

Sponsor

Paid Advertisement

Terry

The Plumbing Wizard

T_Hartigan

New Member

Curlysir

New Member

Hackney plumbing

Homeowner

Similar threads