Shower pan losing water, but not leaking...

plumbbob · Apr 10, 2006

I tried the shower pan balloon trick, and the water level dropped about half overnight. BUT, there's no sign of water anywhere below!

Could it be that balloon is not sealing the drain properly? I used the long thin kind they use to make balloon animals...

Thanks, Matt

Toolaholic · Apr 10, 2006

spend a couple of bucks for a proper test plug

this is too important to screw up!

Sponsor · 2022-01-29T12:20:58-0800

hj · Apr 10, 2006

balloon

There is no way you could blow that balloon up with the pressure needed to seal the drain. That is not the kind of "balloon" we use to plug a drain. The ones we use require 30+ psi of air.

plumbbob · Apr 10, 2006

Doh!

Well, don't I seem foolish!

So now I have 299 of those balloons left, I guess I'll need to start booking kids parties and making balloon bunnies!

I'm off to the store for the right product...Matt

Plumber1 · Apr 10, 2006

Then I don't think your pan is leaking..........

You may have a caulking problem....or some one is letting water out onto the floor and then it takes the path of least resistance.

Jadnashua · Apr 10, 2006

The people over on www.johnbridge.com use them all of the time. Properly done, they don't leak overnight - literally hundreds of people have done it and it works. Course, most of those are new installations, so there probably isn't any crud on the walls of the drain that higher pressure would resolve and get a better seal. If there is a bunch of crud, then even a "proper" plug may not work, either.

Shower pan losing water, but not leaking...

plumbbob

New Member

Toolaholic

General Contractor Carpenter

Sponsor

Paid Advertisement

hj

Master Plumber

plumbbob

New Member

Plumber1

Plumber

Jadnashua

Retired Defense Industry Engineer xxx

Similar threads