Rexles
New Member
I have a Bradford White MI TW 50 gl power vent tank.
Blower was making noise and had come apart. Replaced blower assy with factory parts.
Plugged in and ran fine. After tank was hot, blower would not shut off. Blower runs even though the burner is not on. 2" PVC vent pipe is not hot to the touch.
Any Ideas??
Blower was making noise and had come apart. Replaced blower assy with factory parts.
Plugged in and ran fine. After tank was hot, blower would not shut off. Blower runs even though the burner is not on. 2" PVC vent pipe is not hot to the touch.
Any Ideas??