ddmoit
New Member
HJ, are you suggesting that the pipe as it is will continue to function as a leak proof drain for a new sink? I would love for that to be true.
Laundry tub drain issue
- Thread starter ddmoit
- Start date
ddmoit
New Member
Since I can now see where it will leak if it is going to leak, I've decided to put it all together to see if it does leak.
Sponsor
Paid Advertisement
ddmoit
New Member
It leaks.
Gary Swart
In the Trades
I think it's pretty obvious you have to replace this pipe. As far as a vent is concerned, I know many of the pros will moan and groan over this, but here is a place where an AV vent would work. You would just put a tee in the trap arm and a short nipple with an adapter above the tee. The AV would screw into the adapter.
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
That joint would probably have NEVER leaked, but since you have it exposed all it needs is a hammer and calking iron, or blunt chisel/screwdriver, to hammer it tight to the pipe.
Pipewrench
In the Trades
Don't put a bandaid on it. Fix it RIGHT and replace the pipe to the hub.
ddmoit
New Member
Plumber is coming tomorrow. I am an educated consumer, thanks to you folks.
Last edited:
Similar threads
