main 1/4" copper line done ice-maker

On the of the frig; theres a factory installed plastic line and wire clips that hold it at each end on the "frigge itself, What can i replace this approx;4' line with, Is there specilal fittings for this job?????????

There have been recent post on this question. Scroll down the page and take a look.

If I'm imagining your description correctly (based on this post and the question you added to another post), my refrigerator is the same. There is a 3-4' section of plastic tubing that is mounted to the back of the refrigerator. The supply connects to this tubing at the bottom and the water is carried up to the top of the refrigerator to the ice maker/water dispenser.

There's no need to replace this line for preventative reasons. If it has sprung a leak, you can probably get the replacement parts from the manufacturer or an online appliance parts store.

question on attached factory waterline

Thank you hotbacon,your answer is greatfully appreciated. And as far as posting two threads.....this question was a second problem to the first, and in some forums its against the rules to start a more than one thread in a post. So therefore two posts to close together.

A bit of patience is in order here i think.The job was done and i still had 1/4" plastic line involved' there fore "scrolling down" as gary swart, put it was not the answer i was seeking bob s