Proper settings Enertrol

GregoryR · Oct 22, 2011

Hello,

Could any of you help me with setting this thing (outdoor reset) up properly? People on this site were a real good help last time I had questions, and I thank all of you for your time.

Tom Sawyer · Oct 23, 2011

I would need to know which model you have or a photo

Sponsor · 2022-01-29T12:20:58-0800

GregoryR · Oct 23, 2011

Uploaded with ImageShack.us

I had tried to upload one earlier, but I think it was too large. This should work.

Tom Sawyer · Oct 23, 2011

Set the slide switch to mod and turn the dial to 160 to start. You're up here in Maine with me so, when it gets damn cold out, if the house won't heat, turn the dial up 20 degrees until it will. You can also try going lower if the house is heating ok. The dial is what sets the temperature differential between outside temp and boiler supply temp, adjusted for degree days. I found that 160 to 180 seems to work pretty good around here.

GregoryR · Oct 23, 2011

Tom Sawyer said:
Set the slide switch to mod and turn the dial to 160 to start. You're up here in Maine with me so, when it gets damn cold out, if the house won't heat, turn the dial up 20 degrees until it will. You can also try going lower if the house is heating ok. The dial is what sets the temperature differential between outside temp and boiler supply temp, adjusted for degree days. I found that 160 to 180 seems to work pretty good around here.

Done and done, thanks so much. Hopefully we'll see some savings now that this thing is actually doing its job.

Proper settings Enertrol

GregoryR

New Member

Tom Sawyer

In the Trades

Sponsor

Paid Advertisement

GregoryR

New Member

Tom Sawyer

In the Trades

GregoryR

New Member

Similar threads