Fleck 5600SXT can't get back to all my settings??

Davisracing9

Davisracing9

New Member
Messages
3
Reaction score
0
Points
0
Location
Sun City, Arizona
I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks
 
Well, when I first hooked it up I set my "C" to 32 because I bought a 32000 grain system but then read some where else that it should be set to 20 for the "Salt Efficiency Method"? So I am thinking I should not have changed the settings initially? thanks
 
Water test?
Number of people in the house?

You can either use gallons or a % of the capacity as the reserve.

I use the gallons, -X based on number of people in the home.

Some use 60 gallons per person per day others use 75 gallons per day per person.
 
Last edited:
Davisracing9 said:
I recently installed a Fleck 5600SXT and went through all the programing, but now I can't get back to all the info that I could previously? When I go into the setting mode it only gives me the options to set DO, RT, Hardness, and the percentage safety. Just trying to figure out what I am doing wrong? Thanks
Click to expand...

The company who sold it to you won't help you?
 
You must log in or register to reply here.

Similar threads

O
Fleck 5600SXT settings after hard reset.
Replies
2
Views
481
Ohioblue672
O
Monet33
Fleck 5600SXT setting
Replies
3
Views
914
Bannerman
Bannerman
J
Fleck 5800 Programming Help
Replies
9
Views
904
Reach4
Reach4
fritzk3
Should water be drawing for entire brine draw cycle (Fleck 5600SXT)
Replies
6
Views
9K
Bannerman
Bannerman
PeniParker
Fleck 5600SXT 48K Settings Check
2
Replies
23
Views
5K
Link2
L
Back
Top