Proper disposal of empty propane bottles

BobS0327

BobS0327

New Member
Messages
8
Reaction score
0
Points
0
Location
Maryland
I have several empty propane bottles (the type that is used for soldering copper water lines) and I don't know how to properly (safely) dispose of these bottles.

Thus, how can I properly dispose of these bottles? I don't think I should just throw them in the trash for fear that there may still be some propane in the tanks which could cause an explosion and possible injure someone such as the trash collector.

TIA

Bob
 
If you are worried about them not being empty, put the torch head back on and leave the valve open for ample time to make sure.
 
Hmm, I could have sworn that the bottles say not to dispose of empties with household refuse. We have designated recycling centers where they accept hazardous waste such as these. You can always phone your municipality and ask, or wait to talk to the guys directly on collection day.
 
With refrigerant containers, I drill a few holes in them and throw them in the trash for the scrap metal guys. I'd be a little more leery of drilling the propane containers, but if they were open for a few days..........
 
You must log in or register to reply here.

Similar threads

topsy
Garbage Disposal pushing water/debris into adjacent sink.
Replies
6
Views
2K
topsy
topsy
AndyB7
How to drain this for soldering?
2
Replies
21
Views
5K
AndyB7
AndyB7
D
Some advice for ABS to Cast Iron for a toilet is needed...
Replies
3
Views
7K
Jeff H Young
Jeff H Young
T
Pressure test PEX? Suspect propane leak following boiler repair.
Replies
7
Views
4K
GReynolds929
GReynolds929
T
Advice on Whole House Filtration, Softener, UV, RO Set Up
Replies
0
Views
781
thetbc2
T
Back
Top