Fleck 8500 control performs intermittently

Same books I have..

Could be that the unit is stopping to soon or to late with the switchs and cam to push the brine piston in at the right point for it to draw brine but it will draw brine for a second or two while it is passing that point.
 
Fleck was the manufacturer now known as Pentair.
Just about any dealer that deals has a supplier that has Fleck/Pentair parts like I do..
There are some on line that sell Fleck/Pentair parts... I have always seen this as 8500 or twinflo 100..
 
Fleck 8500

After looking at prices of parts, I'm thinking about replacing the whole system with a Fleck 9000 or Fleck 9100 Water Softener. Some on the online prices are pretty reasonable compared to the parts. Any thoughts on either of these two systems? Thanks
 
I have this same 8500 econominder that I have inherited--with no manual. Does anybody know how I could get an instruction manual, or give me a walkthrough on how to program it?
 
You must log in or register to reply here.

Similar threads

ThomasT
Fleck 5810 not backwashing, rapid rinse
Replies
0
Views
280
ThomasT
ThomasT
R
Fleck 5600 Control Knob Won't Turn
Replies
4
Views
6K
LightBright
LightBright
P
5600SXT Problem?
Replies
3
Views
2K
PJW^&
P
M
AIO Iron Filter Regeneration Settings
Replies
0
Views
319
MOTC
M
R
Best Practice for Soaking/Flushing Carbon after Replacement w/ Fleck 5600 12 Day
Replies
5
Views
587
Reach4
Reach4
Back
Top