Standard Bathtub Spout does not fit

luckylildevil7 · Sep 26, 2010

I am trying to change out my bathtub spout and the standard ones do not fit. The pipe has a weird end (see pic). I am trying to find out if there is a special spout I can buy (lowes does not have one) or if that is some kind of adapter I can remove? Thanks.

Basement_Lurker · Sep 26, 2010

That is a delta adapter fitting for their tub spouts, most other brands, including moen use the slip fit connection that you are probably more familiar with.

Sponsor · 2022-01-29T12:20:58-0800

Terry · Sep 26, 2010

Buy the replacement Delta spout that uses the same adapter.
You can peel the rubber o-ring from the new adapter, install on the new adapter, and spin on the new spout.

I won't install the junk spouts that Lowes has. At least not unless I'm desperate.

http://www.deltafaucet.com/repairparts/details/RP5836.html

They make several styles that fit that adapter.

luckylildevil7 · Sep 26, 2010

So if I buy a Delta Spout it should fit? Thanks for the help.

http://www.deltafaucet.com/repairparts/details/RP5836.html

Jadnashua · Sep 26, 2010

Delta sells various versions, but all that use that adapter should fit. It's nice because since it seals with the o-ring, you can tighten it down to get rid of the gap without problems.

hj · Sep 27, 2010

Any Delta spout with the "adjust to wall" adapter will fit. I am not sure if they make any other kind, since it is the only one I EVER use anyway.

Standard Bathtub Spout does not fit

luckylildevil7

New Member

Attachments

Basement_Lurker

One who lurks

Sponsor

Paid Advertisement

Terry

The Plumbing Wizard

luckylildevil7

New Member

Jadnashua

Retired Defense Industry Engineer xxx

hj

Master Plumber

Similar threads