smthompson
New Member
I replaced a part in the valve and now I can't get the bell to screw properly back into place without the stem becoming very tight to turn. What am I doing wrong?
Please help with Kohler K304 shower valve
- Thread starter smthompson
- Start date
Jimbo
Plumber
go to www.kohlerserviceparts.com
You need a more complete model number, but if you search on K-304- don't forget the dash at the end....that will just get you the shower valves. There are several different options, but if you browse through, you should see your model and how if goes together.
You need a more complete model number, but if you search on K-304- don't forget the dash at the end....that will just get you the shower valves. There are several different options, but if you browse through, you should see your model and how if goes together.
Sponsor
Paid Advertisement
Bconwayusa
New Member
Sorry for such a simple question but I want to replace the valve in the K304 and cannot see how to access it! On line pictures show either a bottom set screw or a covered screw on the end of the handle. My installation has neither. Not sure if it just pops off but I don't want to force it... Suggestions?
