How do I replace a cast iron flange?

dy

New Member

Messages

13

Reaction score

1

Points

3

Location

Bradenton, Florida

• Jun 30, 2010

• #1

How do I replace a cast iron flange? It is welded on I think. I removed the screws and it of course didnt come off. I have a new PVC one, but not sure how to get this flange off. The bolts are corroded and old and just keep spinning, so I need to replace it.

 

hj

Master Plumber

Messages

33,613

Reaction score

1,057

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• Jun 30, 2010

• #2

You have a plumber break the old one off and install a new CAST IRON one. The PVC one will NOT WORK. But if the bolts are spinning, you need new bolts, NOT a new flange.

 

Sponsor

Paid Advertisement

• 1 minute ago

• Add bookmark
• ##

 

dy

New Member

Messages

13

Reaction score

1

Points

3

Location

Bradenton, Florida

• Jun 30, 2010

• #3

I got new bolts, and they keep spinning too. I dont think they are the right size , or do they have different sizes? they were the standard ones that come in with the wax ring.

 

Terry

The Plumbing Wizard

Staff member

Messages

29,942

Reaction score

3,483

Points

113

Location

Bothell, Washington

Website

terrylove.com

• Jul 1, 2010

• #4

I normally use a washer and nut to secure the closet bolt to the flange.
The hardware stores make you buy two sets, or look in the isle for more 1/4 20 nuts and washers.

We sell our customers the bags with four nuts and washers.

 

hj

Master Plumber

Messages

33,613

Reaction score

1,057

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• Jul 1, 2010

• #5

Normally they do not spin because they have "oval" heads which fit into a recess on the bottom of the flange, but most of us secure the bolts to the flange with a nut and washer. It makes it easier to remove the next time, because the bolt CANNOT spin.