11" rough-in
- Thread starter joelprice
- Start date
The Aquia III needs 11.5"
The Drake needs 10-7/8"
The Drake needs 10-7/8"
Sponsor
Paid Advertisement
The CST412MF.10 would work.
I don't know about San Diego, I work with an outfit in Claremont, they go down to SD once a week, but they charge $50 for that.
I don't know about San Diego, I work with an outfit in Claremont, they go down to SD once a week, but they charge $50 for that.
Sdradius
New Member
11 3/8" Rough-In?
I have a 11 3/8" rough-in. I would go with the CST744SF.10 but it only comes in universal height and I prefer it lower.
So the Drake will work with a 11 3/8" rough-in? My remodeler is concerned about the fit. Do the CST743S and the CST744S both require the same amount of space?
Thanks!!
I have a 11 3/8" rough-in. I would go with the CST744SF.10 but it only comes in universal height and I prefer it lower.
So the Drake will work with a 11 3/8" rough-in? My remodeler is concerned about the fit. Do the CST743S and the CST744S both require the same amount of space?
Thanks!!
They work at 10-7/8"
If you see an old pdf, it's just that, old.
The CST744EF.10 would stick out from the wall 2"
If you see an old pdf, it's just that, old.
The CST744EF.10 would stick out from the wall 2"
Sdradius
New Member
Thanks Terry! Do you know if I can find a PDF somewhere that says that? It would help me to prove that it will fit.
We install them. Hundreds of them. I'm not going to bother making a pdf for you saying that.
If you don't believe someone that has installed hundreds, then you might as well pick up the 10" rough and have it set out 2" from the wall.
Free advice is given freely, but I'm pretty busy to be making diagrams of things I've been doing for years.
I know what works from experience, if your handyman needs documentation for something as simple as the installation of a toilet, perhaps he's in the wrong field.
If you don't believe someone that has installed hundreds, then you might as well pick up the 10" rough and have it set out 2" from the wall.
Free advice is given freely, but I'm pretty busy to be making diagrams of things I've been doing for years.
I know what works from experience, if your handyman needs documentation for something as simple as the installation of a toilet, perhaps he's in the wrong field.
Last edited:
Sdradius
New Member
Thanks Terry. I'm also considering the UltraMax. You had said elsewhere the UltraMax requires a 11 1/4" rough-in. Does that mean with a 11/4" rough-in, the tank would actually be touching the wall?
Thanks again!
Thanks again!
Yes,
The tank would touch the wall with the Ultramax at 11-1/4"
The tank would touch the wall with the Ultramax at 11-1/4"
what about Drake II, CST454CEFG
Hi, Terry,
Can Drake II, CST454CEFG fix with 11" rough in?
I checked its specification
http://admin.totousa.com/Product%20Downloads/SS-00239,%20CST454CEF_G,%20V.07.pdf
and there is 1-1/4" gap behind the tank.
Thnaks,
Amy
Hi, Terry,
Can Drake II, CST454CEFG fix with 11" rough in?
I checked its specification
http://admin.totousa.com/Product%20Downloads/SS-00239,%20CST454CEF_G,%20V.07.pdf
and there is 1-1/4" gap behind the tank.
Thnaks,
Amy
Sdradius
New Member
And Terry is correct. Thank you very much!! The Drake fit just fine with the 11 3/8" rough-in. The installer said it was tight, but worked, and there's plenty of space to the wall. There's actually more space to the wall than with the previous toilet.
So if anyone has a 11 3/8" rough-in and is concerned, here's a testimonial that it worked. Thanks again to Terry. Saved me from having a Wellworth installed.
