shahriar
New Member
My water softener Kenmore Ultrasoft 200 has a few problems:
1) Water leaking out of the back overfill nozzle ( OK, ...I fixed that by re-attaching the black brine tubing which threads up from inside of the tank to the Nozzle Assembly). Now, no more leaks.
2) Water about 3-4 inches over the salt inside of the main tank ( dont know how that happened in the first place) and now, how do I purge that water out, before I can dig all the salt out.
3) We have hard water now, no soft water.
4) I checked the nozzle assembly, took out the flow valve (I was told to do so), put the filter screen back properly. I did a 're-charge' cycle several times....I hear pump running, water flowing ( but the brine well doesnt fill up with water - should it ?)
5) What is the next step ?
1) Water leaking out of the back overfill nozzle ( OK, ...I fixed that by re-attaching the black brine tubing which threads up from inside of the tank to the Nozzle Assembly). Now, no more leaks.
2) Water about 3-4 inches over the salt inside of the main tank ( dont know how that happened in the first place) and now, how do I purge that water out, before I can dig all the salt out.
3) We have hard water now, no soft water.
4) I checked the nozzle assembly, took out the flow valve (I was told to do so), put the filter screen back properly. I did a 're-charge' cycle several times....I hear pump running, water flowing ( but the brine well doesnt fill up with water - should it ?)
5) What is the next step ?
Last edited:
