Anode replacement Kenmore Power Miser 6 Gas Water Heater.

oz19454

New Member

Messages

12

Reaction score

0

Points

0

Location

PA

• Apr 4, 2010

• #1

I called the local plumber store. they said Kenmore Power Miser 6 Gas Water Heater need to order from Sear. But I looked at the video. He said it is standard pipe. Since Sear do not have collapsible type. I am wondering whether I can use different anode. Thx.


http://www.thisoldhouse.com/toh/video/0,,20047047,00.html

 

hj

Master Plumber

Messages

33,613

Reaction score

1,057

Points

113

Location

Cave Creek, Arizona

Website

www.terrylove.com

• Apr 4, 2010

• #2

Sears does NOT make water heaters. Depending on its age it was either made by State or AO Smith, which are essentially the same now. Either one uses a standard anode rod, and you can use any type which will work, usually the segmented ones are easier to insert.

 

Sponsor

Paid Advertisement

• 1 minute ago

• Add bookmark
• ##

 

oz19454

New Member

Messages

12

Reaction score

0

Points

0

Location

PA

• Apr 4, 2010

• #3

Well. I ordered from Sear already. I think it is too long. May I cut that short ? Thanks.

 

Jadnashua

Retired Defense Industry Engineer xxx

Messages

32,770

Reaction score

1,195

Points

113

Location

New England

• Apr 5, 2010

• #4

The anode rod works by the amount of surface area, so, if you cut it off, it will still work, but not quite as long or as well. Still, likely better than an old one that has been eaten away (they call it a scarficial anode for a reason!).