3 wire pump
- Thread starter buckeye
- Start date
Waterwelldude
Well driller,pump repair. and septic installer
The red, black, and yellow, go in the same place as the old pump. The green wire is a ground
Travis
Travis
Sponsor
Paid Advertisement
Waterwelldude
Well driller,pump repair. and septic installer
Unless you want to buy 4 conductor submersable pump wire, cut the green one off the pump, or strip about 3", and rap it around the end of the pump.
That green ground wire is supposed to go all the way to the control box ground screw.
Travis
That green ground wire is supposed to go all the way to the control box ground screw.
Travis
Waterwelldude
Well driller,pump repair. and septic installer
the red wire goes to the red in the box
the yellow goes to the yellow in the box
the black goes to the black in the box
the green goes to the ground in the box
They can not be changed in any way.
the yellow goes to the yellow in the box
the black goes to the black in the box
the green goes to the ground in the box
They can not be changed in any way.
my pump has 4 wire red, yellow, green and black, we stripped the green and wrapped around the pump, the wire going down hole is 3 wire black,red and blue, the blue hooked to yellow, in the box should i have 2 wires and blue to ground, as in the switch red and black with blue to ground, or should it 3 wires to strip
Waterwelldude
Well driller,pump repair. and septic installer
The wires can not be changed in any way.
If the yellow wire is spliced to whatever color it has to go to the yellow in the box.
The green is the only ground. If the wires or not put in the box in there slot it will not work.
If the yellow wire is spliced to whatever color it has to go to the yellow in the box.
The green is the only ground. If the wires or not put in the box in there slot it will not work.
Similar threads
