Are you tough enough?
- Thread starter Ian Gills
- Start date
Iminaquagmire
DIY Senior Member
- Messages
- 206
- Reaction score
- 0
- Points
- 0
Sponsor
Paid Advertisement
Master Plumber Mark
Sensitivity trainer and plumber of mens souls
it will work great
we use them all the time...
saves you a lot of greif and misery...
it will work for decades
we use them all the time...
saves you a lot of greif and misery...
it will work for decades
FloridaOrange
Plumbing Designer
Plastic flanges get used down here 99.9999999999999% of the time.
SewerRatz
Illinois Licensed Plumber
They get used here 99.9% of the time and get replaced a few years down the road due to breaking.
MACPLUMB
In the Trades
Closet flange replacement
http://www.instantset.com/closet_rings.htm
THIS IS WHAT YOU WANT TO USE NOT THE PVC TYPE, ! !
http://www.instantset.com/closet_rings.htm
THIS IS WHAT YOU WANT TO USE NOT THE PVC TYPE, ! !
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
flange
add a few more 9's to the decimal and you will have the percentage of broken ones which ARE plastic. A new cast iron flange is the proper installation, therefore the one you describe is not the "only" solution.
add a few more 9's to the decimal and you will have the percentage of broken ones which ARE plastic. A new cast iron flange is the proper installation, therefore the one you describe is not the "only" solution.
Redwood
Master Plumber
Ian, skip the plastic junk!
http://www.oatey.com/Plumber/Shared/ProductGroupDetail/110/165+Cast+Iron+2+NC+No-Calk®.html
http://www.oatey.com/Plumber/Shared/ProductGroupDetail/110/165+Cast+Iron+2+NC+No-Calk®.html
Last edited by a moderator:
Similar threads
