I have a 70's type shower/tub setup with price pfister faucet. It's the type that has 3 knobs- 1 hot, 1 cold and 1 for either tub or shower. The hot faucet was leaking when shut off, so I replaced the stem assembly in both hot and hold and also replaced the seats. Now the cold is either full on or totally off it seems, when off I can turn it 1/4-1/2 turn and nothing happens then all of a sudden it's fully on. However this wasn't the case for the first week or so after the rebuild. What did I do wrong?
Driving me crazy, either HOT or COOOOLD!
- Thread starter JLinder
- Start date
Redwood
Master Plumber
Check for a loose washer...
Sponsor
Paid Advertisement
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
Pp
I would have rebuilt the faucet differently, but would not suggest it for a DIYer because you could damage the faucet. You probably have a loose washer.
I would have rebuilt the faucet differently, but would not suggest it for a DIYer because you could damage the faucet. You probably have a loose washer.
Similar threads
