Wirsbo (Uponor) fitting difference?

Rad777 · Apr 20, 2009

What is the difference between Q4505050 & Q4515050? Respectively Brass Fitting Adapter versus Brass Copper Pipe adapter.

Q4505050-ProPEX-Brass-Fitting-Adapter

Q4515050-ProPEX-Brass-Copper-Pipe-Adapter

The reason I ask for the difference is because I was thinking about how to transition from PEX to Copper -> Valves and/or directly to Valves from PEX.

Are these fittings something I could just sweat a valve onto?

Thank you

SewerRatz · Apr 20, 2009

At first glance, the difference I seen was 5 cents

Seriously, the Q4505050 fitting looks like a male sweat fitting meaning it will sweat in to a fitting like a tee. The Q4515050 looks like a female sweat fitting meaning it will sweat on to a pipe.

Sponsor · 2022-01-29T12:20:58-0800

hj · Apr 20, 2009

Wirsbo

The male/street one will sweat into a valve, the other solders onto copper tubing which would then be sweated into a valve.

Rad777 · Apr 20, 2009

Thanks for the replies & help!

Still deciding if I am going to Pex all the way to the fixtures/valves, or if I am going to transition to copper and attach it to a stud or a 2x4 horizontally betweeb studs.

Kingsotall · Apr 20, 2009

I would recommend stubbing out with copper. A drop ear fastened to some blocking makes for a very sturdy pipe to connect stops and showerheads to.

Check out this link for some ideas.

Rad777 · Apr 20, 2009

kingsotall said:
I would recommend stubbing out with copper. A drop ear fastened to some blocking makes for a very sturdy pipe to connect stops and showerheads to.

Check out this link for some ideas.

Thanks for the recommendation and the advice. I read a few posts by Terry mentioning that practice as well and I think that is what I will use/do.

Thanks

Wirsbo (Uponor) fitting difference?

Rad777

New Member

SewerRatz

Illinois Licensed Plumber

Sponsor

Paid Advertisement

hj

Master Plumber

Rad777

New Member

Kingsotall

Plunger/TurdPuncher

Rad777

New Member

Similar threads