hard to find delta part

phxz06

phxz06

New Member
Messages
3
Reaction score
0
Points
0
Hi I'm replacing a Delta 600 series shower. I had a real hard time removing the old parts due to corrosion and calcium build up. My problem is that I can't find a part that I had to damage during removal. Its a flange/collar that goes over the housing for the water temp/pressure control ball. I had to cut the old flange/collar off because I could not get a good grip with my channel locks to offer counter support while removing the housing cover (didn't want to shear off the copper lines). I am including a picture of the cut and damaged part. The new parts going in are chrome if that may help with a part number.

thanks steve
 

Attachments

  • DSC03705.jpg
    DSC03705.jpg
    27.2 KB · Views: 320
  • DSC03706.jpg
    DSC03706.jpg
    24.4 KB · Views: 301
  • DSC03707.jpg
    DSC03707.jpg
    26.1 KB · Views: 331
  • DSC03688.jpg
    DSC03688.jpg
    15.5 KB · Views: 294
phxz06 said:
Hi I'm replacing a Delta 600 series shower. I had a real hard time removing the old parts due to corrosion and calcium build up. My problem is that I can't find a part that I had to damage during removal. Its a flange/collar that goes over the housing for the water temp/pressure control ball. I had to cut the old flange/collar off because I could not get a good grip with my channel locks to offer counter support while removing the housing cover (didn't want to shear off the copper lines). I am including a picture of the cut and damaged part. The new parts going in are chrome if that may help with a part number.

thanks steve
Click to expand...

Give these guys a call http://www.justfaucets.com/ They have a very large stock of parts, and normally can get me a part they don't have in a day. They bailed me out hundreds of times.
 
I believe the part you need is RP5893-PB. Any large plumbing supply can get it for you, IF Delta still makes it. If they don't , someone in the aftermarket probably does.

You could also google that part number and probably find it online.
 
thanks for the quick response

Thanks guys.. that was the part I needed. I found a plumbing supply store here in phoenix that has it in stock. Glad I found this forum... it rocks.
 
You must log in or register to reply here.

Similar threads

S
Still trying to remove Delta 1500 Series Monitor.
Replies
6
Views
3K
Breplum
Breplum
itsmebp
Totally Lost and Stumped on Handle Replacement
Replies
2
Views
2K
K8te
K
A
90 Degree Elbow 3" x 3" with 1 1/2" High Heel Inlet - impossible to find?!
Replies
3
Views
5K
John Gayewski
John Gayewski
J
Can I fit a new Delta R10000 to the pipes that had a Delta 600 fitted previously without cutting the copper.
Replies
2
Views
1K
jess58
J
T
Is "Adia" a shower valve manufacturer?
Replies
1
Views
3K
TJRAD
TJRAD
Back
Top