New Member

killavolt

killavolt

In the Trades
Messages
33
Reaction score
0
Points
0
Location
Southington CT
New guy here. Well actually old, but new to the forum. It sure looks like you have a bunch of helpful experts here and plenty of DIY'ers to ask questions. I hope to be able to contribute in any way I can. I'm a licensed electrician with 38 years in the business. Worked for my father since I was about 12 years old on summer vacation and progressed from there. I also build and repair computers as a hobby I fly, (private pilot's license) and play alot of golf....when I'm not working. Thanks again.
 
Welcome. It probably wouldn't be a bad idea to put licensed electrician under your name.
 
Okay. Here is my first question for you:

I have a 100 watt and a 50 watt light bulb connected to opposite legs of a multiwire circuit. I open the neutral of these two circuits which bulb will burn brighter?

:) Just kidding.
 
jimbo said:
OK, here's my problem> I put my POS Kodak printer out in the yard and planted a LEMON tree in it. The tree is not doing well. What did I do wrong???


WELCOME!!!
Click to expand...

Well, that's pretty obvious. Your ink cartridges have dried up which is starving the tree of moisture. If cost is an obstacle, at least replace the color cartridge. It controls the color of the blossoms. If the printer is plugged in, make sure it's on a GFCI receptacle, we don't want any ground faults affecting fruit yield....;)
 
GabeS said:
Welcome. It probably wouldn't be a bad idea to put licensed electrician under your name.
Click to expand...

Gabe, when I registered, I filled in the appropriate data. I checked today to make sure I had all the right boxes checkmarked. I don't know why it's not visible when I post to the threads.
 
You must log in or register to reply here.

Similar threads

U
Weil Mclain boiler flame flashback
Replies
3
Views
2K
UP North
U
TanklessTexas
New Install Navien npe-240a2, Replacing Two 11yr Old Tanks 3k SF Single Story Home
Replies
3
Views
4K
Fitter30
Fitter30
F
Back pressure on new well pump
Replies
13
Views
4K
Reach4
Reach4
D
Some advice for ABS to Cast Iron for a toilet is needed...
Replies
3
Views
7K
Jeff H Young
Jeff H Young
AZJeep
Probably need a new Hot Water Heater looking for recommendations please
Replies
4
Views
5K
AZJeep
AZJeep
Back
Top