My Pump Saga Continued

not sure if any recalls or cares )

I had thread where my starter cap went and value man and everyone helpedme as usual.

I installed CSV still having to reset the control box, was trying to avoid the dreaded pump replacement

Finally I did it yesterday and to my surprise when I pulled the pump I foound that when I Installed 4 short years ago I must have scraped the wire on the casing see attached Pic,

So do you guys think this was the root cause or the constant cycling or both?


Thanks again all


here is thread in case anyone wants to refresh

https://terrylove.com/forums/showthread.php?t=24481

It certainly could have been the cause of the pump not working correctly.

bob...