sliding clawfoot tub
- Thread starter kazenza
- Start date
Jadnashua
Retired Defense Industry Engineer xxx
Silicone caulk?
Sponsor
Paid Advertisement
Southern Man
DIY Hillbilly
Try that first. Plan B would be liquid nails heavy duty (exterior rated) that you can caulk over with the right color.
hj
Master Plumber
- Messages
- 33,613
- Reaction score
- 1,057
- Points
- 113
- Location
- Cave Creek, Arizona
- Website
- www.terrylove.com
tub
I assume this is not a cast iron tub. Didn't the legs have holes or brackets to fasten the tub in place? If not then gluing the coasters in place and then siliconing the tub to them may be the only solution.
I assume this is not a cast iron tub. Didn't the legs have holes or brackets to fasten the tub in place? If not then gluing the coasters in place and then siliconing the tub to them may be the only solution.
MaintenanceGuy
In the Trades
Tile grout.
Mix a little tile grout in a cup, the same color as your tile grout and build up a little on the back side of each foot.
I've had to pull toilets that somebody grouted to the floor and they don't want to move. I've even broken a couple trying.
Mix a little tile grout in a cup, the same color as your tile grout and build up a little on the back side of each foot.
I've had to pull toilets that somebody grouted to the floor and they don't want to move. I've even broken a couple trying.
