Please recommend a quality replacement diverter spout

JohnnyCom

New Member
Messages
21
Reaction score
6
Points
3
Location
Sebastopol, California
I have an ongoing problem with water spraying out from the end of my tub diverter spout. I have replaced the spout more than once with the same problem. It seems like the slider type valves at the end are cheaply made and usually leaks from the start (hardware store replacement spouts). I have about a 60psi water pressure. I was hoping somebody could recommend a quality replacement part that would not leak, and possibly where to order online. Thanks for any help on this!
 
I've seen the pros here recommend the Delta divertor tub spout. You might want to look for one of those.
 
Back
Top