Kohler K-4854 Bidet- Anyone ever install one of these?

Canton

Plumber
Messages
66
Reaction score
0
Points
0
Location
Massachusetts
I have a client that wants to install a new bidet , and this is a newly finished bathroom in a new condo complex, he is closing on the place and would like it done before he moves in. I wondering if anyone has installed a Kohler bidet and how difficult it was?
No pun intended but I hear they're a pain in the @@.
 
With most stand alone bidets, they connect with a lav p-trap. The drain is like a lav 1-1/4" tailpiece.
The faucet, is like a lav faucet as far as connections.

You would have to double check the specs, to see if the p-trap can come from the wall, or if it needs to be below the floor.
The water supplies normally come from the wall with standard shutoffs.
 
You are correct sir.

Actually you can come out from the wall or below the floor.
Thanks
With most stand alone bidets, they connect with a lav p-trap. The drain is like a lav 1-1/4" tailpiece.
The faucet, is like a lav faucet as far as connections.

You would have to double check the specs, to see if the p-trap can come from the wall, or if it needs to be below the floor.
The water supplies normally come from the wall with standard shutoffs.
 
Back
Top