leak! I noticed that there is a small area about the size of a Pea==at the bottom of the -U- trap.. I believe we added a cesspool chemical through the 4" cast iron cleanout--and we shouldnt have.. My question is--The rest of the trap looks solid and is solid--Is there any kind of epoxy or fiberglass patch that i can wrap about the trap? I cleaned the area good and used a dab of clear silicone adhesive the GE stuff.. That stopped the leak dead in its tracks-However i want a better patch.. I know i can have a plumber in to replace the pipe assy--i'd like to go a cheaper way tho...The -U- trap with 2 cleanouts runs along my bacement wall and then heads out the foundation out to the one cesspool.. Thanks for any answers... My email is labella62@optonline.net if you want to contact me direct... Thanks all! MARK
Basement Cleanout trap developed a small
- Thread starter nyleak
- Start date
Patrick88
Plumber
It really is not a good idea to patch old cast iron. The small hole you see on the out side is just the start of a bigger problem. Just think the cast is rotting. The only place there is water is the inside, so if you are seeing a small hole now. The next step is a big hole or slit.
Sponsor
Paid Advertisement
Redwood
Master Plumber
You may be able to eliminate this trap if allowed in your area. Check with your local building authorities.
Patrick88
Plumber
The trap is more a weak spot in your drainage system. They cause countless drain stoppages. If you use extra thick T/P it will build up in the thing and act like a sponge. If you are able to remove it I would.
Similar threads
