Replacement of Hold Down Ring

DW85745 · Oct 14, 2004

The metal ring which is surrounds the ABS pipe and to which the toilet is attached is rusted out and the left side toilet bolt cannot be tightened.

Any way to fix without ripping out the ABS?

hj · Oct 14, 2004

flange

I have replaced many of them without "ripping out the ABS", but you can remove that ring and then install a two piece replacement that "bolts" in its place around the existing ABS pipe.

Sponsor · 2022-01-29T12:20:58-0800

DW85745 · Oct 14, 2004

Thanks for response hcj. Will see if I can find a split ring.
Any suggestion about getting the old ring out and off the ABS.

One thought was a dremel tool with ginding wheel and grind through the ring on both sides to split it.

hj · Oct 14, 2004

ring

One side and twist it off.

Terry · Oct 14, 2004

You could also use a repair flange over the existing one.

Replacement of Hold Down Ring

DW85745

Member

hj

Master Plumber

Sponsor

Paid Advertisement

DW85745

Member

hj

Master Plumber

Terry

The Plumbing Wizard

Similar threads