(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Tub to Shower Conversion

  1. #1
    DIY Junior Member shamrock_94's Avatar
    Join Date
    Nov 2006
    Location
    Michigan
    Posts
    17

    Default Tub to Shower Conversion

    From reading on this and other boards, I see that in order to to convert a tub/shower to a shower I must replace the 1.5" waste line with a 2" waste line. I understand this is code, but can anyone explain the rationale? I don't see the difference between using a tub/shower and a shower. If I take a shower in a tub/shower or a shower stall, the water use would be the same. What gives?
    thanks in advance.

  2. #2

    Default

    A shower needs to drain faster than a tub.Tub has a lot more capacity than a shower does,will take much longer to flood and overflow.

  3. #3
    In the Trades Bob NH's Avatar
    Join Date
    Oct 2005
    Location
    New Hampshire
    Posts
    3,307

    Default

    A shower has less storage capacity before it runs over. A 1.5" drain in a shower will probably work fine if the drain is good. It is even less of a problem if you have the 2.5 GPM limit of modern showers.

    The codes are made to deal with worst cases. It could be a problem if you installed one of those multihead body wash things that use 10 to 12 gallons per minute of water from 4 or 5 heads.

    If you can get it past the inspector, you can probably get by with the 1.5" drain. If you are doing the plumbing yourself, you can deal with it as you wish.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •