(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Installing a tongue-and-groove ceiling

  1. #1

    Default Installing a tongue-and-groove ceiling

    I am looking to install a tongue-and-groove pine ceiling. The board width is about 5-1/2" once the boards are inserted and put together.

    My question is in how you mount the boards to the ceiling. Do you use a nail gun and tack the boards down in the groove area? Do you use glue in addition to nailing the boards?

    This is a vaulted ceiling.

    Thanks

  2. #2
    Plumber Cass's Avatar
    Join Date
    Nov 2005
    Location
    Ohio
    Posts
    5,984

    Default

    Try here for some info.

    http://www.askthebuilder.com/493_Vau...Ceilings.shtml

    3 things I would do.

    #1 I would season the pine in the room I was going to install it in for a month or 2 if the pine is very green maybe longer.

    #2 paint whatever will be behind the pine either black or the same color as the finish on the pine.

    #3 what ever finish you want on the pine do it all B4 you install it.

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    If the ceiling joists are running perpendicular to the direction you want to lay the pine, just use chaulline to mark all the joist lines . Finish nail on the tonques. If the joists run the wrong way, you will have to put up some 1x3 lath nailers.

    The overhead work will be tedious, because some of the boards will have a curve, and will need to be "persuaded"

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default T&g

    You nail through the tongue area. A power nailer will be the easiest, because even with a nailer, swinging the hammer overhead will be very tiring.

  5. #5
    Rancher
    Guest

    Default

    I had a finish guy, not a carpenter do my ceiling, exactly as you want. Do as Cass says, season wood, it will shrink, I don't think you need to paint the trusses though, pre paint/stain the wood. My guy campher'd the ends so if they shrunk there would be no noticeable gap, him and a helper did 2000 sq ft in a weekend. Rent a scaffolding on wheels, it'll make it go a lot quicker.

    Rancher

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •