Miranda12
New Member
- Messages
- 7
- Reaction score
- 0
- Points
- 0
I am having a problem with my shower head leaking, not from the threads, but from the head itself. It is a shower stall, not a bath.
I took apart the entire handle, replaced the seats and springs in the two holes at the back (new), replaced cartridge (new), bonnet assembly, and handle (new), but the shower head still leaked.
When I removed the shower head, a lot of water sprayed out, then turned into a drip. I decided to see how much it would drip, or if it had been fixed, so I left a bucket under it. ( I made sure that the handle was pushed into the off position.) In the morning, I checked it and the bucket was full. I am trying to figure out how to fix this costly issue. Thanks, Miranda
I took apart the entire handle, replaced the seats and springs in the two holes at the back (new), replaced cartridge (new), bonnet assembly, and handle (new), but the shower head still leaked.
When I removed the shower head, a lot of water sprayed out, then turned into a drip. I decided to see how much it would drip, or if it had been fixed, so I left a bucket under it. ( I made sure that the handle was pushed into the off position.) In the morning, I checked it and the bucket was full. I am trying to figure out how to fix this costly issue. Thanks, Miranda
Last edited: