(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: ? Application of T plus 2 Rectorseal

  1. #1
    DIY Junior Member handygirl911's Avatar
    Join Date
    May 2006
    Location
    Irving, Texas
    Posts
    3

    Default ? Application of T plus 2 Rectorseal

    I forgot to get PVC glue while at Home Depot. I have this Rectorseal T Plus 2Teflon Thread Sealant. What I am trying to do is attach a PVC cap onto a PVC pipe and a threaded adapter on the other end. I need this to have a good seal because I will be pouring Muratic Acid in the pipe to soak limed up stainless steel. My question is concerning the sealant. Is this a strong enough adhesive to seal the pipe fittings? Thank you for your advice.

  2. #2
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    I have serious doubts for this reason. So-called PVC glue is not glue or adhesive. It is a solvent that liquifies the surface of the PVC pipe and fitting for a few seconds while the joint is being assembled. It actually welds the joint together, much like metal welding where the heat liquifies the metal of both pieces being welded and allows the metal to flow together. Virtually any hardware store will have PVC solvent, and I suggest you get the proper material. Note: ABS is joined the same way except the chemical is different.

  3. #3
    Master Plumber master plumber mark's Avatar
    Join Date
    Feb 2005
    Location
    indianapolis indiana - land of the free, home of the brave....
    Posts
    4,244
    Blog Entries
    1

    Talking dont be stupid

    Dont be foolish........

    go back to the store and shell out
    3 bucks for the right pvc glue....

    you are pouring muratic acid into something you are

    attempting to "half ass" together right?????



    what do you think might happen????

  4. #4
    Plumber Cass's Avatar
    Join Date
    Nov 2005
    Location
    Ohio
    Posts
    5,984

    Default

    If the chamber you have made is air tight and you pour the acid into it and seal it it could explode from pressure build up. Why don't you get a plastic open vessel and do this outside. Thread sealant will not bond, glue, or solvent weld PVC pipe.
    Last edited by Cass; 09-09-2006 at 05:09 AM.

  5. #5
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,673

    Default sealant

    I guess I misread your posting. I thought you wanted to use the sealant to connect a cap to the threaded connection, not "glue" the pipe together. There is no way it would make a leakproof joint, and since it is also a lubricant, the pipes would probably come apart even easier than if you had just pushsed them together without anything on them.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •