Tim Leverenz
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
Hello everyone,
I have a small cottage in the Sturgeon Bay, WI area and I currently have a sandpoint driven 10 feet into the ground. The pump I've used for years is a Deming piston pump...couldn't tell you model or year. The pump is no longer working and I am looking at replacing it with something current and easy to use. Can anyone suggest a pump or pump/pressure tank combination that I could use, how much it would cost, etc. The well point is driven approx. 12" away from the side of my cabin and the pump which is placed inside the cabin is approximately 24" from the well on the outside. We do not drink or shower with this water, it is simply for us to wash hands, and rinse dishes. Maybe we could drink it, but we have opted for all of these years to bring drinking water in carry jugs.
Thanks for your help.
Tim
I have a small cottage in the Sturgeon Bay, WI area and I currently have a sandpoint driven 10 feet into the ground. The pump I've used for years is a Deming piston pump...couldn't tell you model or year. The pump is no longer working and I am looking at replacing it with something current and easy to use. Can anyone suggest a pump or pump/pressure tank combination that I could use, how much it would cost, etc. The well point is driven approx. 12" away from the side of my cabin and the pump which is placed inside the cabin is approximately 24" from the well on the outside. We do not drink or shower with this water, it is simply for us to wash hands, and rinse dishes. Maybe we could drink it, but we have opted for all of these years to bring drinking water in carry jugs.
Thanks for your help.
Tim