(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: Garbage disposal

  1. #1

    Default Garbage disposal

    How does one fix a garbage disposal? Thanks.
    Last edited by Cookie; 09-03-2006 at 03:46 PM.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,382

    Default

    That is not a screw, it is the motor shaft. Turn it on and go.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3

    Default

    Jim's right. The hex wrench just frees up the disposer. I like to turn it back and forth a few times to free up a frozen G/D.

    FYI, I prefer to use a long needle nose pliers and a flashlight to pull out stuff from the G/D. There's also a reset button on most disposers near the hex fitting. Sometimes it pops out when there is a G/D jam.

    Eric

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •