bathroom sink..install oval into round???

Users who are viewing this thread

A12548

Member
Messages
41
Reaction score
2
Points
8
Location
Florida
i removed our old 19 inch round, which has 18inch opening. We noticed theres no fancy styles for 19 rounds, all the ovals have the shell design that we like, however the oval we measured doesnt cover the front to back depth of old cutout. Are there any standard ovals that will cover that depth, and id just cut a wider width? thanks
 

hj

Master Plumber
Messages
33,600
Reaction score
1,037
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
lav

Kohler has a Spiria which is 18 7/8" deep. Whether its curve would cover the entire cutout, however, would only be obvious if you had the template to put over your 18" round opening. Kohler also has several fancy rectangular shaped sinks that would work.
 

A12548

Member
Messages
41
Reaction score
2
Points
8
Location
Florida
lav...

the spiria im looking up says 18 3/8, not 18 7/8, is that still enough lip for 18 inch cutout?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks