(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: Toilet Not Level

  1. #1
    DIY Junior Member fixit_lady's Avatar
    Join Date
    Jan 2005
    Location
    Midway, UT
    Posts
    1

    Default Toilet Not Level

    I installed a new toilet. The process went OK and nothing leaks, however, it is not level. I think the floor is the problem. Since the high side is where the float mechanism is, the water does not shut off as it should, even after adjusting the float. Any suggestions on a means to level the toilet? Do I have to take the whole thing out and start over?

  2. #2
    Plumber Deb's Avatar
    Join Date
    Sep 2004
    Location
    Idaho
    Posts
    200

    Default Deb

    An unlevel toilet will not affect the shut off of the ballcock mechanism. I would suspect debris in the valve. Shut off the water, disassemble, flush, and reassemble.
    Deb
    The Pipewench

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •