smiddleton
New Member
- Messages
- 1
- Reaction score
- 0
- Points
- 0
My installer put in twin 86 gallon Propane hot water heaters and it appears that the cold water feed goes into the first unit and then out into the second unit. I have a sometimes small hot water load and during the heating seasons I will have a larger load for my radiant heating.
I would think that the first unit would work very hard and the second unit would only be receiving pre-heated water and would not work hardly at all.
I also have a recirculation pump that keeps instant hot water that feeds into the second hot water heater.
Information on the best way to have these units installed is limited at best; especially considering the needs of my hydronic radiant heating.
Any suggestions on how these units should be configured?
I would think that the first unit would work very hard and the second unit would only be receiving pre-heated water and would not work hardly at all.
I also have a recirculation pump that keeps instant hot water that feeds into the second hot water heater.
Information on the best way to have these units installed is limited at best; especially considering the needs of my hydronic radiant heating.
Any suggestions on how these units should be configured?