CCbrands1
New Member
- Messages
- 19
- Reaction score
- 0
- Points
- 0
whirlpool i bought requires a mortar bed.
directions dont indicate the thickness of the mortar bed.
i've heard that a half inch is usually enough.
is there any minimum thickness I should shoot for.
i was thinking about a half inch in the front, 1.5 inch near the back.
at what point would be overkill?
directions dont indicate the thickness of the mortar bed.
i've heard that a half inch is usually enough.
is there any minimum thickness I should shoot for.
i was thinking about a half inch in the front, 1.5 inch near the back.
at what point would be overkill?