(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: toto drake with 12" -> 10" rough in adapter?

  1. #1
    DIY Junior Member lairdwd's Avatar
    Join Date
    Jul 2006
    Location
    Connecticut
    Posts
    5

    Default toto drake with 12" -> 10" rough in adapter?

    I just realized that I have a 10" rough in, but ordered a 12" toto drake. Is there any way I can work with this? This is a new townhouse I bought, and just made a bad assumption it was a standard 12" rough in.

    Thanks.

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,202
    Blog Entries
    1

    Default

    The Drake will work at 11-0"

    But not 10".

  3. #3
    DIY Junior Member lairdwd's Avatar
    Join Date
    Jul 2006
    Location
    Connecticut
    Posts
    5

    Default Chisled an alcove in the base tile and it just barely fit

    Thanks Terry. The story came to a great end!

    The rough was about 10 1/2, and eyballing it up, it was very close. I chisled away a very small alcove in the baseboard tile, and it got me to about 10 3/4It just barely fit. Thank goodness the drake has a tiny little tank that doesn't hang over the bowl too much.

    WOOHOO! Man, I was so psyched!!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •