(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Bathtub Reglazing - anyone have it done?

  1. #1
    DIY Junior Member Phatbrain's Avatar
    Join Date
    Jan 2005
    Pacific North Wet

    Default Bathtub Reglazing - anyone have it done?

    Greetings all,

    I'm concidering having my tub reglazed, any comments or recomendations?



  2. #2
    Plumber, Contractor, Attorney LonnythePlumber's Avatar
    Join Date
    Sep 2004
    Wichita, Kansas

    Cool Sometimes Good

    You can get a good reglazing job that will last. But there are still companies that try to do it too fast and with a lesser quality of chemicals.

  3. #3

    Default Reglazed tub

    I had my old grey, mineral stain tub reglazed by a company in Seattle an off white. Looks brand new! Cost $325 + $40 for choosing something other than white.
    Last edited by LadyL; 01-08-2005 at 02:45 PM. Reason: incorrect price

  4. #4
    DIY Junior Member
    Join Date
    Jan 2005


    I've had 2 tubs refinished. 1st didn't last more than a yr. and the guy was no longer in business. 2nd time I just made sure to find a reputable person that was in business for 10 yrs and had lots of referrals. Both warranties were the same ... 1 yr. but as I said the first guy was no where to be found. The 2nd guy said that his job will last at least 5 yrs if not longer when properly cared for.
    Like the other poster mentioned, some just don't do it with the same skillfull process.
    I learned after the first time that once the finish is cracked in any way, it can quickly deteriorate. My son used to take his toy trucks in w/ him and little scratches would happen. I also put a ladder in the tub with not enough padding to paint the ceiling and that didn't help either.
    With the 2nd finish, I was a lot more careful with the tub and it's been 3 yrs and still looks great. Use what they recommend for cleaning.
    Oh, and one other thing - the first time the guy put a permanent slip resistant mat in the tub. (very very slippery w/o something) They dont recommend suction type pads. The 2nd guy put something bumpy - not sure exactly what - under the glaze. (It could have just been a material process and not a mat per se) Worked much better for slip resistance and not so scratchy.
    Hope this isn't too long, but I like to hear others actual experiences with these kind of things. Hope it helps you with your decision.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts