(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 7 of 7

Thread: More than two toilet seat sizes?

  1. #1
    DIY Senior Member Joerg's Avatar
    Join Date
    Oct 2004
    Location
    Califonia
    Posts
    138

    Default More than two toilet seat sizes?

    Hello Folks,

    When we mounted the almost brand new seat of our old elongated bowl onto the new AS Yorkville elongated bowl it seems at least an inch too short.

    Are there several elongated seat sizes? Or do they want to make us special order "their" seat?

    Regards, Joerg.

  2. #2

    Default

    The specs drawing for the AS Yorkville (model 2325) shows the measurement from center of the post hole to the front of the seat to be 18 1/2".
    This is the standard length for an elongated toilet seat.
    Keep in mind that this is for the seat proper,not the cover.The cover ("lid") on most seats is beveled and usually falls short of the front of the bowl.Thats the only discrepancy I can think of.

  3. #3
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,202
    Blog Entries
    1

    Default

    Two sizes

    Regular
    Elongated

    There is about 1.5" in difference.
    Most elongated seats would overhang some on that bowl.

  4. #4
    DIY Senior Member Joerg's Avatar
    Join Date
    Oct 2004
    Location
    Califonia
    Posts
    138

    Default

    Thanks, Terry and Lancaster. Maybe then this seat wasn't really an elongated one although it said so on the package. The seat proper doesn't overhang and the front posts aren't fully on the bowl rim.

    So, we'll go shopping for a longer one. Or I'd have to lose weight...

    Regards, Joerg.

  5. #5
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,655

    Default seat

    But to answer your original question, yes there are more than two seat styles. The old Eljer Emblem had a "squared off" seat that nothing else fits well. There has also been various "saddle seats", that were also proprietary, along with the American Standard Roma that has 11" center to center seat bolts and costs in the neighborhood of $200.00.
    Last edited by hj; 06-05-2006 at 07:32 PM.

  6. #6

    Default

    There are also some wacky looking one piece Kohler toilets that will accept nothing but the OEM seats.And the list prices on them are 250-300$.

  7. #7
    DIY Senior Member Joerg's Avatar
    Join Date
    Oct 2004
    Location
    Califonia
    Posts
    138

    Default

    Ok, bought a genuine American Standard elongated seat for the Yorkville. Guess what, it doesn't overhang. Oh well, we'll just leave it on there.

    The half-wing nuts had to be filed off on one side because they didn't leave enough space around the hole on the Yorkville. Probably the guys who design the toilets do not talk with the guys that design the seats. However, this doesn't surprise me anymore.

    Regards, Joerg.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •