(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Nibco washer

  1. #1
    DIY Junior Member
    Join Date
    Sep 2004
    Location
    Schwenksville,Pa. 19473
    Posts
    2

    Default Nibco faucet washer replacement

    http://www.terrylove.com/wwwboard/messages2/24906.html

    I need to know what size/type washer to replace current one.
    I still have a drip from the faucet.
    Last edited by jdcam; 09-13-2004 at 11:44 AM. Reason: more detail

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,659

    Default washer

    It could take any of several sized, or it could be a washerless one. Have you already replaced a washer but it did not cure the problem? If so then you probably have a damaged seat and have to replace that also.

  3. #3
    DIY Junior Member
    Join Date
    Sep 2004
    Location
    Schwenksville,Pa. 19473
    Posts
    2

    Default

    I just got a reply from Frank Borso, who answered the original post.
    He gave me the information on the size I need.
    The faucet has a slow leak,about 1 drip every 1.5 seconds, so I think it's just the wrong size washer in there.

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,659

    Default washer

    It would have to be very wrong to drip, and if it were that "wrong" it would run instead.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •