(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: old "Valley" shower

  1. #1
    DIY Junior Member emilio88's Avatar
    Join Date
    Dec 2004

    Question old "Valley" shower

    hi & happy holidays from Toronto... i live in a 15 year old condo that has a Valley shower control that leaks pretty bad when i turn it on... i don't know how to get to the "core" of the fixture...a chrome coloured plastic cover (about 6" square) hides everything and i don't see any set screws or clips, etc. to remove... i'm afraid i'll break it if i pry it off with a screwdriver... are there hidden clips inside somewhere?

    as mentioned, it's about a 6" square plastic cover ( about 2" deep and surface mounted) with a black plastic wheel in the centre ... i've removed the decorative strip from the wheel, but i don't see any screws that aid in removal...

    any advice/thoughts would be greatly appreciated
    Last edited by emilio88; 12-24-2004 at 05:59 PM.

  2. #2
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    San Diego


    Valley of course is history, but most repair parts are still available from the aftermarket manufacturers. Parts like escutcheons, flangesm, and handles are more difficult. There are some replacements, but not necessarliy exact matches for what you have.

    Some Valley handles had a set screw on the side of the handle ( underside).

    Check websites for repair parts and you can possibly find an exploded diagram.

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Cave Creek, Arizona

    Default valley

    our description does not match any Valley tub/shower faucet I have ever seen.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts